Interactive diagram
Ceiling Fan Wiring With No Wall Switch
The fan box has constant power with no wall switch. Both the fan and light wires join the hot, and you control everything with pull chains or a remote receiver.
Tool
Interactive ceiling fan wiring diagramThree steps: pick your setup, flip the switches, wire it
Step 1 of 3
Which setup do you have?
Look in the box with the breaker off: what matters is where the power cable comes in. Pick the one that matches, or keep the one already selected.
- One wall switch (fan + light together)Power → switch → fan
- Two switches (fan and light separate)Power → 2 switches → fan (14/3)
- No wall switch (pull chains or remote)Power → fan
Step 2 of 3
Follow the power
Glowing wires are carrying power right now. On a small screen, scroll the diagram sideways.
- Black: hot
- White: neutral
- Red: hot / traveler
- White + black tape: hot
- Bare copper: ground
- Wire nut
- Glow: carrying power now
With constant power, control the fan with pull chains or add a remote receiver kit in the canopy.
Step 3 of 3
Wire it box by box
Safety first. Turn off the breaker and confirm the power is off with a non-contact voltage tester before touching any wire. Follow your local electrical code; some areas require a licensed electrician or a permit. If you find aluminum wiring, cloth-covered wiring, scorched insulation or more than one circuit in a box, stop and call an electrician.
Fan box
Other ceiling fan setups
- Ceiling Fan Wiring With One Switch
- Ceiling Fan Wiring With Two Switches (Separate Fan and Light)
- Ceiling fan wiring diagram: full guide
What you need
- Fan brace + fan-rated boxInstalls through the hole between joists.Check price
- Ceiling fan remote kitSeparate fan and light control on one switch leg.Check price
- Fan speed control + light dimmerTwo-in-one wall control for 14/3 setups.Check price
- Non-contact voltage testerConfirms the power is really off before you touch a wire.Check price
As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.