Wiring guide
ecobee Smart Thermostat Premium wiring for heat pump + emergency heat
The ecobee Smart Thermostat Premium should work, but one wire needs checking before you connect it.
Separate AUX and E wires are common on older heat pumps. Many smart thermostats have no E terminal, so what happens to that wire decides whether you have a direct swap. Read the full heat pump + emergency heat guide for how to confirm your setup and mistakes to avoid.
Wiring diagram
Detected system: Heat pump, 1-stage compressor, 1-stage aux heat, emergency heat, fan, C wire present · 7 wires
ecobee Smart Thermostat Premium
Probably works: verify first| Wire | Color | Job | Connect to | Note |
|---|---|---|---|---|
| R | red | 24 V power | Rc | |
| C | blue | Common (C wire) | C | |
| Y | yellow | Cooling, stage 1 | Y1 | |
| G | green | Fan | G | |
| O | orange | Reversing valve (O/B) | O/B | |
| AUX | white | Auxiliary heat | W1 | |
| E | brown | Emergency heat | Verify first | No E terminal. If E and AUX land on the same terminal at the air handler (common), cap E. Emergency heat then uses the aux wire. |
Install steps
- Turn off power to the furnace/air handler (switch or breaker) and the AC condenser. Confirm the old thermostat is dead.
- Photograph the old wiring, then label each wire with the letter it came off. Ignore short jumpers.
- Connect each wire to the ecobee Premium terminal shown above. Cap unused wires one at a time.
- Restore power and finish setup in the app using the settings below.
- Test heat, cool and fan. If a breaker trips or equipment runs nonstop, power off and call a pro.
App settings to choose
- Reversing valve (O/B): set to O.
- Equipment type: heat pump with auxiliary (electric strip) heat.
What you need
- ecobee Smart Thermostat PremiumThe thermostat itselfCheck price
As an Amazon Associate we earn from qualifying purchases, at no cost to you.
Confirm against the official ecobee install guide. The app also checks your wiring during setup.
Frequently asked questions
Where does each wire go on the ecobee Premium?
R → Rc; C → C; Y → Y1; G → G; O → O/B; AUX → W1; E → verify first.
Do I need a C wire for the ecobee Premium?
You already have a C wire, so no adapter is needed.